During the process of installing the Camera, you must have encountered many times when you have forgotten the password, so in this article I will guide you how to hard reset on the device. Dahua DVR NVR4108-4KS2/L, NVR4104-4KS2/L. I. Hard reset location II. How to do it. Step 1: Press and hold the reset button as shown Unhook a computer or laptop from the internet and go into ethernet settings and using the IPv4 settings manually change the IP address to 192.168.1.100. Then go to INTERNET EXPLORER (needs to be Explorer and not Edge or Chrome with IE tab) and type in 192.168.1.108 (default IP address of Dahua cameras) and you will then access the camera. Step 2 On the new function interface (by clicking button at the top of the interface), click Device manager to open the Device Manager Interface. Step 3 Click Auto search. Step 4 Select device(s) to initialize, and then click “Initialize” to enter the device initialization interface. Step 5 Configure device initialization parameters (User Scene Change The Scene change functionality is designed to detect if there is a change in the scene previously captured by the camera, such as a person covering or moving the camera to obscure the scene. The camera compares the image prior to the change to that after to determine if the scene is different, if it is an alarm will be triggered. Step by Step Instructions. 1. Launch SmartPSS and on the home page click DEVICE CFG. 2. On the left column click your designated device to configure. 3. Follow Each section below to access the specific Setting: 2ZQaD.

dahua dvr resolution reset